2023 Honda Power WB20
Features may include:- 164 gal./min. capacity
- Durable silicon carbide mechanical seal
- Cast iron volute and impeller
- The WB20 features abrasion-resistant silicone-carbide seals for extended wear.
- The WB20's exclusive, Honda-designed 4 vane impeller offers improved performance and high efficiency.
- The rigid-mount cast iron volute reduces case wear, increasing the life of the pump.
- Protects the pump, while offering a convenient tie down location for transport.
- High performance mounts minimize vibration, keeping the pump from “walking” away or “burying” itself in soft soil conditions. The reduced vibration also reduces wear on components, increasing the pump's durability.
- Protects the pump by shutting the engine off when low oil is detected.
- You can rest easy, knowing your pump is covered from top to bottom for 3 full years.
- The strainer allows up to 8 mm (5/16 in.) solids to pass through, helping to prevent clogging.
- 2023
- Honda Power
- WB20
- Base
- General
- GX120
- 118cc
- 2.4"
- 1.7"
- 8.5:1
- Priming time: 110 sec @ 16.4 ft.
- Direct
- Run Time @ Max Discharge: 1.7 hr
- Centrifugal, Self-priming
- 45 psi
- Suction port diameter: 2" | NPT Discharge port diameter: 2" NPT
- 19.3"
- 14.4"
- 16.5"
- Total head lift: 105 ft. | Suction head lift: 25 ft.
- 0.53 gal
- 164 gal/min
- 44 lb.
- Oil Alert: Std | Strainer Part #: 78325-YG3-000
- Volute: Rigid Mounted Cast Iron | Impeller: 4 Vane Cast Iron | Mechanical Seal (Pump case / impeller): Silicon Carbide/Silicon Carbide
- Residential: 3 years | Commercial: 3 years
- WABT-5147087
- $599.00
- West Chester
- New
- L163834
- 2023
- Honda Power
- WB20
- 0
- red
- 0
- 0
- 0
- 0
- Gas
- 44 lb.
- Available
- 14.4"
- 16.5"
- WABT-5147087